Why Pool Table Refelting Means More Than Looks
Rips in the surface of your pool table can be very frustrating. There can be a small rip and it makes playing on it an interesting challenge. This means that, to not be accused of rigging the game in your favor, the felt should be repaired or replaced. A professional firm can do this pool table refelting and they will make sure it is right.
You could patch that rip with a bit of felt or redo the entire surface. Patching a rip can take a few minutes of careful preparation and you can be back at your game of eight ball. You must ensure that the patch does not interfere with the delicate roll of each ball as it passes over this area. This can be accomplished with a small piece of felt, some adhesive, a very sharp knife and a lot of patience.
One of the best courses of action should be to have the entire surface recovered. This will ensure that the table has a fresh look, ready for whatever you throw at it, although not literally of course. Getting help in this project from a professional in Denver, CO will be as easy as giving them a call or stopping by the several that are available in the Mile High City. A do it yourself project of this type will need the help of a few professionals.
You will find that a professional will be the better choice for this project. They have been doing this for years and have the experience to get it right, the first time. They will ask you what color of felt you would like and this opens a lot of possibilities for you and the room in which it is placed.
The vast majority of pool tables come in a standard green felt. This is fine if you are looking for standard, however, the ability to get other colors might interest you. Some of these others will be purple, blue, red, cream and those with designs on them. Sprucing up your party room can begin with the largest game there.
When the professionals arrive at your home, you will be able to see what they are doing and ask questions. They will begin by making sure of the measurements. The rails will come off to make it easy to remove the old felt. Old adhesive and staples will be removed and any rough spots will be sanded or prepared otherwise.
The exacting cuts on the felt will be accomplished, both lengthwise and for width. There will be a little left over for the staples to hang on to. There will then be applied a very thin coating of adhesive, but not too much. The felt is laid down and stretched, in all directions, to ensure a tight fit. This will then be stapled in the same location where the rails will be reattached.
Rails are then disassembled and covered as well. With weights on the table top and rails reinstalled, a 24 hour curing time will be appropriate. A representative will come back and ensure everything is as it should be. They might even challenge you to a game to make sure.
You could patch that rip with a bit of felt or redo the entire surface. Patching a rip can take a few minutes of careful preparation and you can be back at your game of eight ball. You must ensure that the patch does not interfere with the delicate roll of each ball as it passes over this area. This can be accomplished with a small piece of felt, some adhesive, a very sharp knife and a lot of patience.
One of the best courses of action should be to have the entire surface recovered. This will ensure that the table has a fresh look, ready for whatever you throw at it, although not literally of course. Getting help in this project from a professional in Denver, CO will be as easy as giving them a call or stopping by the several that are available in the Mile High City. A do it yourself project of this type will need the help of a few professionals.
You will find that a professional will be the better choice for this project. They have been doing this for years and have the experience to get it right, the first time. They will ask you what color of felt you would like and this opens a lot of possibilities for you and the room in which it is placed.
The vast majority of pool tables come in a standard green felt. This is fine if you are looking for standard, however, the ability to get other colors might interest you. Some of these others will be purple, blue, red, cream and those with designs on them. Sprucing up your party room can begin with the largest game there.
When the professionals arrive at your home, you will be able to see what they are doing and ask questions. They will begin by making sure of the measurements. The rails will come off to make it easy to remove the old felt. Old adhesive and staples will be removed and any rough spots will be sanded or prepared otherwise.
The exacting cuts on the felt will be accomplished, both lengthwise and for width. There will be a little left over for the staples to hang on to. There will then be applied a very thin coating of adhesive, but not too much. The felt is laid down and stretched, in all directions, to ensure a tight fit. This will then be stapled in the same location where the rails will be reattached.
Rails are then disassembled and covered as well. With weights on the table top and rails reinstalled, a 24 hour curing time will be appropriate. A representative will come back and ensure everything is as it should be. They might even challenge you to a game to make sure.
About the Author:
You can visit www.americanbilliardsservice.com for more helpful information about Pool Table Refelting Is Best Left To The Professionals.
Comments
Post a Comment